Side eave hanger
Optional Side Eave hanger system
The Redpath side eave hanger system can be fitted to your Standoffshelter at time of construction or as an aftermarket accessory. The standard cladding is a heavy duty reinforced translucent membrane called Polweave, or it is possible to clad with colour steel or iron as an optional extra. This option was very popular for use on Herdhomes who we supplied to for many years.
It is also possible to clad the side eave hanger with colour steel / iron as an option. This design was also supplied for use on Herdhome roofs, to whom Redpath were a supplier for many years.
The side eave hanger is often fitted to Standoffshelters if the farmer is planning to distribute feed / supplements along the outside walls onto a pathway or into a trough system. Eave hangers can also be beneficial if the proposed site is exposed to high winds, - as the eaves will help protect the sidewalls from driving rain and keep the interior floor and the stock better sheltered.
Side eave hangers will typically be fitted for the full length of the building and will hang from the top of the wall just below the standard exterior guttering system. The hanger may also be set lower down on the wall and thus provide greater protection for feed paths / troughs if required.
Side eaves offer a cost-effective weather shield improvement to your Redpath Standoffshelter!
Free Ph 0508 733 728 or use the enquiry form below:Enquire now